Stands & Specifications. • Human factors Standards and specifications. User Aids . CR SAE J ; SAE J ; SAE J ; SAE J ; TMC RP Vehicle Electronic Programming Stations (VEPS) System Specification for Programming The software interfaces are described in SAE J and SAE J W. A., , Iron and steel. IMI. Maardt, J. G., & Erichsen, E. J. (Jensen), , Pro[ducing and utilising gas and heat. Maas, J., , Indicating and registering.
|Published (Last):||1 July 2012|
|PDF File Size:||18.2 Mb|
|ePub File Size:||4.50 Mb|
|Price:||Free* [*Free Regsitration Required]|
Objectives to be met by VEPS include: SAE J provides such a specificatiob. This standard is also available to be included in Standards Subscriptions. See Figure 9 and 6. Because the customization is performed using both OEM-provided and vendor-provided software, the roles and responsibilities of the vendor and OEM elements must be defined to permit the development of common vendor software elements for all Original Equipment Manufacturers OEMs.
Already Subscribed to this document.
SAE J228 describes the specificaton of the Win32? This standard is not included in any packages. Job 3 is being programmed, and job 4 will be presented to the programming station. Because the customization is performed using both OEM-provided and vendorprovided software, the roles and responsibilities of the vendor and OEM elements must be defined to permit the development of common vendor software elements for all Original Equipment Manufacturers OEMs.
STEP 8— If the exit code indicates that an error has occurred during the programming session, the OEM shop floor program can read and parse the verification file to determine the cause of the error.
Upon termination, the VCP supplies an exit code. Standards Subscriptions from ANSI provides a money-saving, multi-user solution for accessing standards. This directory will be created and named by the OEM. VEPS can be achieved. As an example, features such as cruise control and road s speed limiting require that controllers be calibrated with specific information related to the equipment installed on the vehicle such as tire size, rear axle ratio, and desired operating speeds.
Unless otherwise indicated, the latest version of SAE publications shall apply. Please first log in with a verified email before subscribing to alerts. The parameter file is interpreted by a Vendor Component Program VCP that performs the specified programming via a common communication interface. Proceed to Checkout Continue Shopping. The vendor also has the option of providing immediate, graphical feedback to the OEM when a critical error is encountered by the VCP. It contains records which describe the parameters supported by the VCP, including default value, lower limit, upper limit, etc.
Beyond clarification of the J document, the changes to VEPS and Vendor Communications Programs are focused on the implementation of a common method for communicating with the vehicle’s network for all vendor communications.
We have no amendments or corrections for this standard. The station has identified that job 3 was presented to it for programming and initiated the programming process. Please first verify your email before subscribing to alerts. Add to Alert PDF. The programming result for each parameter is reported as a record in the verification file. Each major vehicle component has multiple vendors who compete for component sales in OEM markets.
The VCP only needs to support one component or family of components produced by an individual vendor. The figure shows four assembly jobs progressing down the assembly line. You may delete a document from your Alert Profile at any time. The definition file format is defined by SAE J Win32 is a trademark of Microsoft, Inc.
By maintaining common elements with J, the orderly transition from vendor Communication Programs to Vendor Component Programs will be assured.
Jobs 1 and 2 have been programmed. The definition and remarks files document the parameters that can be programmed in the Vendor Component. Provide positive indications of programming results.
Simplify communications with the vehicle network.
The exit codes are defined by the following Component Error Code table see Table 1: Programmable parameters identify the information items needed to calibrate the controllers. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is sspecification sole responsibility of the user. Need more than one copy? Subscription pricing is determined by: Design-Build of a Form As the voice of the U.
The VCP runs as a separate Windows? Optionally, the OEM shop floor program can read the verification file to determine the status. The feedback sspecification be done with a simple message box.
SAE J identifies the system resources of a Win32?